Install Macpup From Usb
Lucid Puppy provided a tool called QuickPet which enables you to install all the most commonly used. Click here to buy MacPUP on DVD or USB. MacPup; Puppy LINUX.
Install Macpup From Usb
Puppy runs live and installs to hard disk drives, USB storage devices, zip drives.
- How to Create a Full Installation on an Internal Hard. The LiveDVD/USB. Any changes and with the LiveDVD/USB connected; Install to H.D.D.
- In this simple USB Puppy Linux tutorial we illustrate how to easily Create a Puppy Linux USB Flash Drive using [].
- 2Installation
- 2.3To USB flash drive
- 2.3.1Make the USB flash drive bootable using Syslinux
- 2.3To USB flash drive
Partitioning[edit]
First you need to partition your disk with GParted.
Installation[edit]
To HDD[edit]
From an ISO file
To CF[edit]
To USB flash drive[edit]
If you have a running Puppy installation, or don't mind burning a CD-ROM to make one, it's probably easiest to just use its installer app to create a bootable USB flash drive. But if you don't have a running Puppy, and you can't or don't want to go through the intermediate step of burning a CD, read on. It's super easy.
Rather than an in-depth howto with a million options, this is a record of 'how it worked for me' with an occasional aside of 'how it might be different for you'. Do expand it with more data if you try something out and know if it works or doesn't.
I used Windows XP as the host OS during installation. A very similar process should work with Linux (I'll note the difference). I don't know about OS X.
I used a 2 GB flash disk with the FAT16 file system. It should work (not tested!) just as well with a FAT32-formatted one, but not all BIOSes are smart enough to boot from a FAT32 USB device. This exact process won't work for other filesystems (but if you're curious, read up on Extlinux). Almost all flash drives you can buy today come pre-formatted as FAT16 if they 2 gigs or less, or FAT32 if they're bigger than 2 gigs.
You'll need a program that can extract files out of ISO disk images. I recommend 7zip because it's free and easy and it handles a lot more other stuff besides ISO images. You can get 7zip at [1] or pick your own poison, for example at [2].
This process is dependent on Puppy live CD images using Isolinux for bootup. If they ever stop doing that, the process won't work anymore. (Though it will probably become just a matter of writing a small config file.) The version that worked for me was puppy-4.2.1-k2.6.25.16-seamonkey.
Make the USB flash drive bootable using Syslinux[edit]
If you're using Windows[edit]
Get the Syslinux in ZIP format (or any other format if you prefer) from [3]. The version that worked for me was 3.80, but you're probably best off just getting the latest one. If you open that link, you will normally see a list of files and directories. If, for example, the current version of Syslinux is 3.81, there will be a file called syslinux-3.81.zip. Clicking or right-clicking on the file's name should cause your browser to offer you options to download and save the file.
Syslinux doesn't 'install', you just need to unpack the ZIP archive to a folder of its own. In modern Windows versions, you can normally do this by just double-clicking the file's icon where ever you saved it on your computer, selecting all the contents and 'copying' them to a newly-created folder.
After that, make sure your USB drive is plugged in and accessible, open the command prompt and run:
Bengali movie chirodini tumi je amar 2008. Oct 4, 2010 - Chirodini Tumi Je Amar 2008 Rahul-Priyanka Superhit Bangla Film - Free Online Bengali movie Video-on-demand release. Feb 11, 2018 - Yeh Dil Ashiqana Full Hd Moive Video Download Be Humble. Chirodini tumi je amar 2008 1080p full'. Je amar Indian Bangla Suparhit Full. Chirodini Tumi Je Amar tells the story of a rich, pampered young girl, Pallavi who falls in love with. Angle, witnessing the pain of lovers in this Indian Bengali film. Check out full movie Chirodini Tumi Je Amar and more movies at Hungama. Download Hungama Play app to get access to unlimited free movies, latest music videos, kids movies, Hungama originals, new TV shows and. 2008 BENGALI UA.
(folder where you unpacked Syslinux)win32syslinux.exe -m -a(drive letter of the USB drive):
So if you extracted Syslinux to the folder c:syslinux and your USB drive letter is E:, you would run c:syslinuxwin32syslinux.exe -m -a E:
If you're using Linux[edit]
Also get and unpack Syslinux, unless it is already present in your distribution like in my Linux Mint 10 Julia. Install ida pro kali linux. As far as I can tell from the Syslinux manual you'd then need to run:
syslinux(your USB flash drive's partition)
So if your USB drive is /dev/sda and you want to install Syslinux to partition 4, you'd run syslinux /dev/sda4. Note that /dev/sda might be your hard drive so make sure you specify the right device. It is also common to have only one partition on a USB flash drive.
I don't know if this is the standard behavior but on my system the syslinux command itself did not modify the device's Master Boot Record (first sector or 512 bytes), which tells BIOS how to boot from the device, so I also had to do this from within Syslinux's folder (/usr/lib/syslinux/ in my case):
cat mbr.bin >(your USB flash device)
This prints out the contents of the mbr.bin file while the output is redirected to your USB flash drive so it rewrites the first 440 bytes of the device while leaving the rest of the device, including the remaining 72 bytes of MBR where partition information is stored, the same.
Not sure if this matters but if it still does not work for you, you can try marking the partition with the bootable/active flag with fdisk:
fdisk(your USB flash device)
Just follow the internal help or use p to show device information and list its partitions or a to mark one of them bootable/active.
I tested this on Linux Mint (Ubuntu-based) and it works.
Download and extract the Puppy live cd image file[edit]
Get it from [4]. Use 7zip or whatever other program to extract all files from the image into a directory of their own. You can also use the following command to mount the image file in Linux:
mount -o loop(path to .iso file)(where to mount)
You might need superuser permissions for this so just precede with sudo or switch to a superuser session by su:
sudo mount -o loop(path to .iso file)(where to mount)
Tweak and copy files[edit]
Among the files extracted from the ISO image, rename the file isolinux.cfg to syslinux.cfg. It's no surprise that Isolinux and Syslinux have almost the same config language. You can delete isolinux.bin, you won't need it. (Maybe some other files too - who knows?)
Modify the newly-renamed file syslinux.cfg in a text editor by changing the line append initrd=initrd.gz pmedia=cd so that instead of pmedia=cd it reads pmedia=usbflash. (If in some future installation the pmedia option is given in the kernel line instead of append, change it to usbflash there.)
Copy the files as they are now onto the USB drive. If you're doing it right, the drive's root directory should hold the files vmlinuz and pup_XYZ.sfs.
You're done[edit]
That's all. Set your BIOS to boot from USB and enjoy. If you are not sure how to do this, try pressing one of the Function keys (F1-F12), Delete or Escape right after powering on your PC to enter the BIOS configuration menu or boot device selection menu. This is not the same for all systems, for example on my Asus laptop F2 gets you the configuration interface and Escape the boot device selection menu while on another Hewlett-Packard laptop it takes F9 and F10 to do the same things.
You can delete the directories where you unpacked Syslinux and the image file on your hard disk if you want. Download timeline template omnigraffle.
In this simple USB Puppy Linux tutorial we illustrate how to easily Create a Puppy Linux USB Flash Drive using the Universal installer included on the Puppy Linux CD. Puppy is a unique Linux compilation created by Barry Kauler. It is super small, yet contains many useful tools and utilities. Most versions of Puppy Linux will fit on a 256MB USB stick. Making it great to install to those older tiny thumb drives you might have sitting around.
Puppy Linux Desktop Screenshot
Distribution Home Page: puppylinux.org
Minimum Flash Drive Capacity: 128MB
Persistent Feature: Yes
What you need to create a Portable Puppy Flash Drive
- 256MB or larger USB Stick
- PC with a CD reader/burner
- Puppy ISO and a blank disk
USB Puppy Flash Drive Installation process
Puppy Linux contains it's own Universal Installer so installation is fairly straightforward.
- Download Puppy linux ISO and burn the ISO to CD.
- Start your computer via the Puppy CD.
- Once Puppy has loaded, from the Taskbar, Click: Start > Setup > Puppy universal installer
- Follow the onscreen instructions which will walk you through the Puppy USB installation process
- When finished with the Puppy USB install, reboot your PC and go into system BIOS to change your boot order to boot from the USB device
- Save your settings and reboot your PC to enjoy running Puppy Linux from USB